was successfully added to your cart.

All Posts By


Construction Supply Sourcing Best Sellers

By | Uncategorized | No Comments

One of the best sellers at Contractor Supply Sourcing is the patented Oilinator Super Sorbent Mat. This oil spill relief mat will absorb up to seven gallons of oil and other petroleum-related substances on both land and water. Even fully saturated with oil, this mat will float and remain completely waterproof. Grommets allow for linking of multiple mats to surround water or land based oil or other petroleum-type spills. Mats come in several sizes to best match the absorbent needs of the land or water oil clean-up.

IncrediSorb is the most efficient absorbent oil spill relief compound on the market. This product will absorb oil leaks, oil spills and other petroleum based clean-ups. The proprietary technology attracts and captures oil and fuel and will not sink even when fully saturated. Use for both land and water spills.

HoldTight 102 is the industry wide best known secret for achieving optimal surface preparation. HoldTight 102 is a rust inhibitor by removing chlorides and other contaminants. Since HoldTight 102 is not a coating, it does not interfere with primer or coating adhesion because it does not create a separate layer or moisture barrier between the freshly blasted surface and the new coating. HoldTight 102 can be used successfully with both wet and dry blasting.

Be My Guest

By | Fashion | No Comments

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent ullamcorper suscipit mi, id convallis risus ullamcorper eget. Aenean sagittis eros nec eros euismod, quis dapibus leo semper. Mauris rutrum viverra adipiscing. Read More

Oil Spill Absorbents- Oilinator

By | Oil Spills | No Comments

Oilinator has created a terrific product line of oil spill absorbents that are made up of 100% recycled sorbent materials. These oil spill absorbents are unsinkable and float indefinitely even when they are fully saturated with oil. The capacity of all these products is amazing and instantly works to absorb any kind of spills. This tremendous capacity leaves the water clean and clear. Many of the oil spill absorbents comes with grommets so they can be attached together to form any shape or size. Furthermore, these products work instantly on land and water. They are amazing and save time, money, effort and injury. Their effectiveness and affordability accompanied by its light weight, high capacity abilities make it the next best thing for cleaning up spills. These oil spill boom socks, flexible booms, mats and drum toppers have all been authorized by the United States Environmental Protection Agency and have its own patent pending with the US government patent office.

When you have an oil spill, be spared the loss of expensive labor and of potential high fines associated with violations of federal, state and local law by using these oil spill absorbents. Gallons of oil related spills can be picked up by these Oilinator products. New and old gasoline, jet and diesel fuel, motor and gear oil, transmission, brake, power steering and hydraulic fluid coolant, antifreeze, oil and water based paint- are just a few related spills that can be cleaned up quickly and efficiently with these products. These kinds of spills can be found in an endless number of places from fire departments, airports, oil drillers, machine shops, auto repair shops, lube facilities and much more. These Oilinator oil spill absorbent products have been amazingly designed to instantly smother, contain and absorb spills of any size. Featured in places like CNN Money News, Forbes Magazine and ESPN Magazine, the Oilinator has even been used to help with the Gulf Oil Spill.

Saf-T-Kut Plumbers Helper 10-1 Multi Tool

By | Electrical, Plumbing | No Comments

The Plumbers Helper 10-1 Multi Tool is a simple and convenient tool developed for assisting with simple plumbing repairs and maintenance. It is a compact tool fitting for these basic plumbing repairs. The Plumber Helper 10-1 Multi Tool includes 10 different and equally useful tools. The first is a quarter inch hex key that is used to free up clogs from frozen and/ or non-working garbage disposals. The second is a convenient level that includes a small ruler and can be detached for use. An example could be when you are trying to set and level a toilet. The third is a 5/16” standard hex nut driver for use on hose clamps or no-hub couplings. The fourth is a de-burring tool that can be utilized for reaming out copper and plastic piping. The fifth is a dual, fine surfaced sided flat file for filing smaller items. The sixth is a standard Phillip’s Screwdriver #2, one of the most common screw heads. The seventh is a quarter inch flat head/ slotted screwdriver. The eighth is an angle hook or O-Ring Washer Pick that is perfect for retrieving O-rings and washers, or to poke, prod, and pull. The ninth is a small, standard utility knife. And finally, we have a quarter inch hex nut driver that can be used for loosening or tightening tech screws on water heater vents or air conditioning vents. The Plumbers Helper 10-1 Multi Tool includes everything and more for all types of basic plumbing issues.


Saf-T-Kut Compression Ring Cutter

By | Electrical, Plumbing | No Comments


Saf-T-Kut’s Compression Ring Cutter is the fastest and easiest way to remove brass compression rings from copper piping. It’s small and easy-to-handle tool can fit into tight spaces (unlike sleeve pullers) and make quick work of an otherwise difficult ring removal. This method assures no damage is made to the copper pipe and that there will be no mushrooming at the end of the copper pipes. To use the compression ring cutter make sure to first unfurl and remove all existing water shadows and/ or angle stops from the copper piping. Then push the existing compression nut back until the brass compression ring is exposed. After that, place the pipe insert of the compression ring cutter into the copper pipe. However, you do need to makes sure that the copper pipe is reamed properly per plumbing code. If the copper pipe is correctly, then simple turn the splitter head of the compression ring cutter clockwise until it is finger tight. After your fingers cannot turn the splitter head anymore, take a pair of pliers and, with little turns, turn the splitter head clockwise until a snap is heard. Do not tighten past the point of that snap otherwise it could cause damage to the copper pipe and/or break the compression ring cutter itself. Lastly, loosen the splitter bit, and then remove the existing compression nut and brass ring. The compression ring cutter works as advertised and is both very well engineered and durable. Best of all, it is done in seconds, fits into tight spaces, and does not damage the copper tubing!

Saf-T-Kut Box Bag

By | Electrical, Plumbing | No Comments

BoxBagSaf-T-Kut’s Box Bag is reliable, durable, and reusable. To put it aptly, the uses are endless. Measuring 31” long, 18” wide, and 12” tall, the box bag was designed by contractors and made from construction grade materials. As the name suggests, the box bag is shaped to form a box and can hold up to 50 pounds of food, fluid, or debris. With a very visible and bright orange color, it definitely stands out. It is a unique, malleable box bag, the square shape making it unique from other common bags, and the ability to contort the bag making it unique from other boxes. This perfect combination makes it a perfect receptacle- with four handles that can be gathered together for carrying handles or simply folded over. It is compact when it isn’t needed and the perfect tote otherwise.

The box bag is extremely helpful in a myriad number of situations and industries. For example if you need it for plumbing repairs it can hold many appliances, protect a tub from being damaged when repairing a toilet, or contain any potential messes. The flexibility of it allows it to fit under tight spaces, constricting water or debris to the box bag and easily disposing of the waste when finished. In general, it is great for protecting surrounding areas and for job and construction projects. Furthermore, it is even graciously helpful for more mundane tasks like yard work or just protecting the truck of your car after a day at the beach since there are bound to be wet towels and sandy clothing. Once again, the uses of the box bag are simply endless.


Saf-T-Kut Reciprocating Saw Blade

By | Electrical, Plumbing | No Comments

Saf-T-Kut’s Reciprocating Saw Blades eliminate damage to electrical wiring and plumbing pipes. They are easily inserted into most commercial grade reciprocating saws- some examples include Milwaukee, De Walt, Makita, and Rigid. These sleek and simple reciprocating saw blades easily cut through any existing dry wall and plaster. The tips of these blades are carbide tipped for maximum strength and purchases come in a pack of two. What separate these reciprocating saw blades from other ones are the design capabilities that guarantee that when cutting, there will be no damage to any hidden electrical, plumbing and telecommunication lines that may be installed behind your walls. So if there happens to be any wires and pipes within the wall, these reciprocating saw blades will – as they are designed to be- cut through the wall safely without damaging the wires and pipes.

Easy to use for the DIY in-home plumbing and electrical repairs, it is perfect for the professional plumber and professional electrician. An additional benefit is that compared to other blades, there is over 60% less dust when using these reciprocating saw blades. Furthermore, the application of utilizing these reciprocating saw blades is stress-free and simple. They are installed just like any other typical reciprocating saw blades. For the most part, you need to simply slip the blade into the reciprocating saw, though it is beneficial that you check that the blade is locked into place before use. When using, firmly hold the reciprocating saw at a ninety degree angle against the dry wall or plaster board and cut safely away. With Saf-T-Kut’s Reciprocating Saw Blades, removing dry wall and plaster is now easy, safe and worry free from damaging wires and pipes within the wall. You can now cut safely with Saf-T-Kut.

 Recip mini saw-blades1


Nulla Magna

By | Music | No Comments

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi vitae dui et nunc ornare vulputate non fringilla massa. Praesent sit amet erat sapien, auctor consectetur ligula. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non ligula augue. Integer justo arcu, tempor eu venenatis non, sagittis nec lacus. Morbi vitae dui et nunc ornare vulputate non fringilla massa. Praesent sit amet erat sapien, auctor consectetur ligula.